The walls to our house are the most thermally efficient and strong walls on the market. They are constructed at a factory based on the house builder's plans and delivered as panels that are then assembled on-site with holes pre-cut for the windows and doors. After a long period of designing and redrafting the plans, the panels arrived on a truck in early spring. Allison said "our house is here."


Assembly of the panels began after a half day of unloading them from the semi tractor trailer truck.
The great innovation of these building panels (called Structural Insulated Panels or SIPs) is the complete lack of thermal bridging, meaning that there is no transmission of outside temperature to the inside of the building. There is a 5/8 inch thick layer of board on the outside (called OSB, oriented strand board) and a 5/8 inch layer of board on the inside of the wall. But here's the key, the two boards are separated by 5 inches of polyurethane foam that is affixed as a middle sandwich layer between the two boards. The entire sandwich sits on a wooden rail that is laid along the edge of the foundation slab. The walls lock together and they sit on the heated slab and there is no way for exterior temperature to commingle with the inside of the wall board. It is advertized that this kind of construction will cut energy bills by 75 percent! In the next picture you get a good idea of the sandwich-like nature of SIPs.



It takes only two men to construct a finished wall using these innovative panels that are both insulative and extremely strong to boot. As the exterior walls create the thermal "envelope" around the building and provide the rigidity, the interior walls are constructed with good old fashioned studs.




The house is beginning to take shape. In the distance we can see the upper barn from the dining room window hole.


And as a sentinel it watches over our property and wonders "how are they going to get that roof on there??"